HP Pavilion 17-e146us Keyboard Replacement

Geschrieben von: Emma Neumann
  • Kommentare: 1
HP Pavilion 17-e146us Keyboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

20 Minuten

Einleitung

Use this guide is need to replace the keyboard of your HP Pavilion 17-e146us. The keyboard is the component of the laptop used to type. If the keyboard is faulty certain letters or portions of the keyboard may not work, and therefore it is difficult to type when necessary. This guide will show how to replace a faulty/broken keyboard with a new keyboard. Please be aware that the keyboard is attached to the motherboard and is not an easy process to remove.

  1. 2tvCQHgweJqpugxX

    • Turn the device over.

  2. Fp3cd1JaJJTTDKZ5
    Fp3cd1JaJJTTDKZ5
    W3YZj3LBHAy3GbYZ

    • Move the battery lock switch to the right to unlock. The battery release button will unlock the battery from the computer.

    • The battery release button is located above the the battery.

  3. LMecZbi44NFNwYMi

    • The battery will unlock from the computer.

    • Remove the unlocked battery from the computer.

  4. IBMYaxFObsVU3urs
    IBMYaxFObsVU3urs
    sUZbNaJJlNHiebAB
    sVBObXydptrIwNbh

    • Remove the 6.25 mm screw in the left-lower hand corner of the battery port using a Phillips head screw driver.

  5. OGotch6UFZmDZu1I

    • Remove the HP protect smart ventilation case.

    • The smart ventilation is a part of the back cover of the device

  6. gxj1paSmtI5HRQUb

    • Remove seven 6.5 mm screws using a Phillips #0 screwdriver.

    • Remove four 3.0 mm screws located in the charger port using a Phillips #0 screwdriver.

    There’s not any screw in the top-right corner under the back cover. Is it somewhere else?

    John Seaton -

  7. aHYBMl4qK6AnwmjU
    aHYBMl4qK6AnwmjU
    d2oPNiUM2kTkqdfH

    • Pull and remove the disk drive.

    • The disk drive is located on the left side of the device when it is turned over.

    • Remove two 3.00 mm screws on the inside of the disk drive using a Phillips screwdriver.

  8. P4x3QAIrKjCQGwHV

    • Apply firm pressure inside the release port using a narrow tool such as a screw driver or tweezers.

    • The release port releases the keyboard.

  9. iot51GTFCfLjDm16

    • Flip device over so that the cover is facing towards you

  10. yEph4FhtcTK53viX
    yEph4FhtcTK53viX
    TgHUH6cKpRjrvCvw
    HxkRwAqdSHldtyuC

    • Open device. The keyboard should be separate from the inside panel.

    • If the keyboard does not automatically pop out, use a spudger or opening tool along the edge of the front panel and the keyboard to pop the keyboard out.

    • Detach the keyboard's cable connector from the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Emma Neumann

Mitglied seit: 04/09/19

629 Reputation

0 Kommentare