Einleitung

The battery of the HP Pavilion is made to last for only a period of time, after which the battery tends to run low sooner than usual. This means the battery capacity has lessened and may need a replacement. This guide will walk you through the process of accessing the RTC Battery of an HP Pavilion dv5000 in order to replace it.

  1. cZnhkfKw6cIqULBQ
    • Turn off the computer, and unplug it from all external power sources.

    • Lay the computer face-down on a flat surface. Orient the computer to match the image.

    • Locate the battery release switch, as indicated in the image by the red rectangle. Slide the switch from right to left, and remove the battery.

  2. yBC1GU3lnlQbGbWj
    yBC1GU3lnlQbGbWj
    gweWfQchouBbCTIR
    bPTrZCevyKgBgECn
    • Remove the two 5mm Phillips screws on the right side of the RAM cover.

    • Lift the right side of the RAM cover, and remove it.

  3. wukVBUdGELvLFUjP
    wukVBUdGELvLFUjP
    odCaCDwTWxYDVse4
    • Disconnect the antenna leads from the wifi card by lifting the gold ends of the wires off the prongs on the wifi card.

    • The white wire connects to the AUX terminal.

    • The black wire connects to the MAIN terminal.

  4. VqDftPftqZpGWCoJ
    VqDftPftqZpGWCoJ
    x3dSvoCxUPPy6PFn
    • Remove the two 6.0mm Phillips screws from the wifi card.

    • Remove the wifi card.

  5. KkUBAUHAilHPZqbG
    KkUBAUHAilHPZqbG
    tJFVwVJjwfOKhwKr
    abuZQiNEYAvrFb6N
    • Remove the RTC Battery from the battery holder.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Farid Khoshnevissan

Mitglied seit: 11/10/10

805 Reputation

0 Kommentare