HP Pavilion dv6000 Wireless Card Replacement

Geschrieben von: Ben Hirsch
  • Kommentare: 0
HP Pavilion dv6000 Wireless Card Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

10 - 15 Minuten

Einleitung

Replace the wireless card in your HP Pavilion dv6000.

  1. UHWDG2htTUJBR1Ia

    • Lay the laptop on a flat surface, battery side up.

    • Remove the two screws securing the RAM shield to the lower case.

    • The screws will remain captive within the shield.

    • Lift and remove the RAM shield up from the lower case.

  2. CsFGSwkYVRSNafna
    CsFGSwkYVRSNafna
    mFOfuCyTQYRXjFFI

    • Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.

    • Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

  3. sBeXKTSKwo6sIHDk

    • Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

    • Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

    • Grasp the wireless card and pull it straight out of its socket on the motherboard.

  4. dEa6elYhLc2AvUPF

    • Wireless card remains.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ben Hirsch

Mitglied seit: 05/10/10

3826 Reputation

0 Kommentare