Einleitung

Did your hard drive crash? Or are you looking for more speed or capacity from a new hard drive? This guide will walk you through replacing your hard drive

  1. hFfPDtwIAJlKO2X6
    • Unscrew one Phillips #1 screw from the back panel.

    • The screw is on a spring and attached to the panel. It will pop up, but will not separate from the back panel.

  2. d3nOOKoWVQsUh5G5
    d3nOOKoWVQsUh5G5
    YUZwsOaagB6XSbFU
    • Slide the back panel down and pull it up.

  3. AOUTtpeDZMcvIHVG
    AOUTtpeDZMcvIHVG
    SLVAwmg1WqleDJFS
    • Static electricity can damage the components of your laptop. Make sure you are wearing an anti-static bracelet before you touch the hard drive.

    • Using the black tab on the connect and/or a prying tool, lift up to disconnect the black hard drive cable from the green circuit board.

    • Pull the black cable up and out of the back panel. This will make taking the hard drive out much easier.

  4. loC2Riw1nWqdEWAe
    loC2Riw1nWqdEWAe
    MtqcgxLYedy3Eyll
    • Gently pull up on the plastic tab attached to the hard drive.

    • Pull the hard drive up and to the right to remove it completely from the laptop.

  5. 3ksMRylA5t2RhajK
    • Remove the black SATA cable from the hard drive.

  6. JfeIqy5MfVOFEClD
    JfeIqy5MfVOFEClD
    nWVvV1KjCwSwVGDQ
    • Remove the black rubber end caps.

  7. vvQGYWJVhLYanfi2
    vvQGYWJVhLYanfi2
    2Fe1tVEbmQIh6iTa
    • Remove the four silver 5 mm Phillips #1 screws from the hard drive.

  8. fGi2td2eNGTIELgE
    • Remove the plastic cover from the hard drive.

Abschluss

To reassemble or replace your hard drive, follow these instructions in reverse order with the working drive.

Erik Miller

Mitglied seit: 22/04/14

2105 Reputation

0 Kommentare