Einleitung

Before using this guide, make sure to review the troubleshooting page for the HP Pavilion x360 14m-ba011dx. The battery may not actually need to be replaced depending on the problem, which is why it is good to trouble shoot first.

With this guide, the user will be able to remove and replace the battery of the HP Pavilion x360 14m-ba011dx. The model number for this device is 1KT47UA. A battery replacement may be needed if your laptop is overheating or you are having difficulties booting the laptop up. The battery itself is only one large cell that is not adhered to any surface.

Make sure to turn off your computer and discharge the battery before starting this guide. By draining the battery before removing it, you reduce the risk of potential fires. ''

  1. RPUKffKKGYnSGNnb
    RPUKffKKGYnSGNnb
    oa6KWbEVEWJJ2EYc
    • Unclip the 5 cables connecting the motherboard to the computer.

  2. Oc616F1ABbcSmPZd
    • Remove ten 4 mm Phillips screws using a Phillips #00 Screwdriver.

  3. ThXLuJTbYNGXTSGc
    • Gently remove the motherboard.

  4. iBOVQBMfFnfSlVPY
    iBOVQBMfFnfSlVPY
    fa1BOV4xnFCnVE1I
    • Remove the top left and right rubber pads closest to the hinge of screen using a plastic spudger to expose the screws underneath.

    • Remove the following 6 screws from the bottom of the device using a Phillips #00 Screwdriver:​

    • Two 7.5 mm screws.

    • Three 5 mm screws.

    • One 6.5 mm screw.

  5. MxXMl1DxrJ15wCNu
    • Push into the two screw holes that were under the rubber pads with the screwdriver to pop the keyboard out just a little.

    • Do this with the screen open so that you do not damage the screen.

    • Do not remove keyboard all the way.

  6. QfVOtromRdfeLbXi
    QfVOtromRdfeLbXi
    RZQTafiCfeC2AhhJ
    • Separate the keyboard from the rest of the device using a metal or plastic spudger around the edges.

    • Pull up gently just until you can see the cables attaching the keyboard to the motherboard.

    • Flip the small white flaps holding the cables to the motherboard open to unplug the cords.

  7. wWX21rleJKWOQMQ4
    wWX21rleJKWOQMQ4
    4FFu2ammY5EUiiJR
    • Remove the purple cable attaching the battery to the motherboard by flipping the black flap and pulling the cable out.

    • Remove seven 4 mm Philips screws using a Phillips #00 Screwdriver.

  8. 6MBaWVGqKBtXmpL4
    • Remove the battery by gently pushing battery up, then pulling.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Katie Pruis

Mitglied seit: 16/01/20

778 Reputation

0 Kommentare