Einleitung

"Prerequisite Only"

Replace the HP ProBook 4520s switch cover as a prerequisite for other guides.

  1. tBH2i3InFjDPXO53
    tBH2i3InFjDPXO53
    GMoSyyP4krdsgKK6
    • Flip the 4520s upside-down with the front toward you.

    • Push the two latches below the battery inwards at the same time.

  2. 2UperWDcKBhwdJOT
    • Remove the battery by holding the latches and sliding the battery away from you.

  3. bgGHZmqC2HYHpxMc
    bgGHZmqC2HYHpxMc
    5dN2EbIGZTMR5XUB
    • Use a Phillips #1 screwdriver to remove three 2mm screws where the battery was located.

  4. Sw2HVH1QqNjLguPw
    Sw2HVH1QqNjLguPw
    vJyIN4c1eJMjDLSf
    • Flip the 4520s over and rotate it so the back is facing you.

    • Use a metal spudger to peel off two rubber caps located on either side of the battery port.

  5. UrXaFch51XZhqKDb
    • Use a Phillips #1 screwdriver to remove the 3mm screws behind the caps.

  6. Q1M5MnamdllGGcZM
    Q1M5MnamdllGGcZM
    TEWakXX1YpaMAayH
    lGVuXnWPmRUqPCy1
    • Rotate the 4520s and then open it with the screen facing you.

    • The switch cover is located above the keyboard. Push the switch cover away from you until it comes loose from the 4520s.

    • Lift the switch cover away from the 4520s and set it aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Robert Spencer Harrison

Mitglied seit: 21/09/16

1298 Reputation

0 Kommentare