HP Slate 7 Extreme 4400US Battery Replacement

Geschrieben von: Brandon Ko
  • Kommentare: 1
HP Slate 7 Extreme 4400US Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

25 Minuten

Einleitung

Replacing the battery is intensive repair, make sure to be careful when cutting and soldering the wires.

  1. RkoLRexKFesVm2Za
    RkoLRexKFesVm2Za
    EODHZlKaA3UGJnnt
    ajsc31mSDi1LGnEL

    • Use the plastic opening tool to separate the back cover from the tablet. Carefully use the tool to pry open the sides, going around the entire tablet to lift the sides up.

    • Once all sides have been pried up, pull the cover off and place it to the side.

  2. VJIhggPVqCXVPj61
    VJIhggPVqCXVPj61
    AclCD6VqT6UbEU6I
    rilHcYbkRjUevbvv

    • Cut the battery connectors one by one using wire cutters.

    • Do not cut all the wires at the same time; you risk blowing up the battery or destroying the motherboard!

    • After disconnecting the battery, take the new battery and use wire connectors to connect to the motherboard.

    • You may use a soldering tool to disconnect the wires from the motherboard, and to also soldering the wires for the replacement battery onto the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Brandon Ko

Mitglied seit: 15/09/16

698 Reputation

Ein Kommentar

Dude, do you have this part? HP Slate 7 Extreme 4400CA

https://www.worthpoint.com/worthopedia/o...

sivaldodomingos -