Einleitung
If your HP Spectre x360 13-ac023dx laptop is overheating or is having trouble charging properly, use this guide and follow it to replace the battery.
Werkzeuge
Ersatzteile
-
-
Use a Torx #5 screwdriver to remove the six 3.5 mm screws holding the back cover to the laptop.
-
-
-
Use the Phillips #000 screwdriver to remove the four 3.5 mm screws holding the battery.
-
After removing the screws, detach the battery wire from the mother board with the iFixit opening tool.
-
Then, carefully lift the battery off with the iFixit opening tool.
-
To reassemble your device, follow these instructions in reverse order.
2 Kommentare
The overall procedure is ok, however as others commented instructions on how to remove the feet would be helpful. I tried a heat gun to help loosen the glue, however that just melted the feat. Overall go the job done, but 2 out of the 4 feet were destroyed in the process.
Also in my case there were no screws under the top or bottom feet, so I could have probably removed the cover without removing the feet.
I think HP quietly refreshed the internals of this laptop or something, because despite appearing externally identical to the laptop shown in the pictures, mine has a smaller main board and differently sized battery. so you should open yours up and check before ordering the battery. mine has the PK03XL. this is double annoying because I was repairing this one for a friend, and she's the one who ordered the battery.
csd -