Einleitung
The motherboard is the central hub for communication between all of the components in a device. If one or more components start to fail, your motherboard may need to be replaced. Use this guide to replace the motherboard in your laptop.
-
-
Using the Torx T5 screwdriver, remove the eight 8 mm screws on the bottom case of the laptop.
-
-
-
Pry up one corner of the bottom case with a spudger.
-
Work the spudger around the edges, making your way towards the bottom of the laptop.
-
Remove the bottom case.
-
-
-
Orient the laptop the same way as the pictures. The battery is bordered in a red outline.
-
Remove the six 4 mm screws using a Phillips #000 screwdriver.
-
-
-
The speaker cable may be attached to the battery with black electrical tape. If so, remove the tape.
-
Move the cable clear of the battery.
-
-
-
Use tweezers to remove the speaker cable from the groove attached to the battery.
-
Push the cable to the side so it does not get in the way of the battery removal.
-
-
-
Remove the black tape from the motherboard.
-
Remove five screws using the Phillips #00 screwdriver that holds the motherboard in place.
-
Disconnect five ribbon cables, three power cables, and two wifi antennas from the motherboard.
-
Gently lift the motherboard out of the computer. Be careful to not to disturb the CPU fan.
-
To reassemble your device, follow these instructions in reverse order.
