HP Spectre x2 12-a002dx Screen Replacement

Geschrieben von: Talha Bin Amir
  • Kommentare: 2
HP Spectre x2 12-a002dx Screen Replacement

Schwierigkeitsgrad

Very difficult

Schritte

5

Zeitaufwand

45 Minuten - 1 Stunde

Einleitung

A broken screen or a unresponsive screen may need replacing. This guide shows how to remove the screen. This guide is also helpful for replacing any other component of the device since nothing can be accessed without removing the screen.

  1. KyZgTBC61NCRYUbe

    • Make sure the device is powered off and the kick stand is retracted.

    • The HP Spectre should be placed on a flat surface with the keyboard detached.

  2. cqVD6JWMyP3i4EjM
    cqVD6JWMyP3i4EjM
    tOGZjqyxOgQarjYD
    LfBvMupAvIeqF1Bh

    • To remove the screen, there is an entire system of clips which need to be undone as well as 4 Phillips M1.5x2.7 screws.

    • The screws should be removed using a Phillips #000 screwdriver. There is a sticker where the laptop attaches to the keyboard.

    • Heat the sticker (if needed) and use fine point tweezers to grip the sticker and remove it.

    Could you please some image of the screws and the tool you used?

    fabio -

    Podrían subir el procedimiento para despegar los clip, ? al parecer viene pegada la pantalla a la carcasa, en ese caso se usaría la pistola de calor o estoy mal ? Al guíen que me guié por favor, agradezco de antemano

    sergio villanueva -

  3. a1ag6PT1SjOIKIW1
    a1ag6PT1SjOIKIW1
    ZiicD4GKUScvNGYd
    KpJHuZH4cEWVAC2N

    • Use the plastic opening tools or insert a spudger to begin unclipping the system.

    • Pry the screen off once all the clips have been unclipped.

    • The screen may shatter if not already shattered (beware of flying glass).

    • This screen will broke. there are double tape underneath the frame, that is not listed in here.

  5. Es61jkWTG112FaXH
    Es61jkWTG112FaXH
    OKMgk4wroTedXA4V
    brw2PUXIUJPNFpCt

    • Remove the connecting cable of the screen and battery. Use a spudger to reveal the adhesive strip and carefully peel it off.

    • Insert a spudger to the other end and release the ZIF connectors. Detach the cable.

    • While a metal spudger is pictured, use a black nylon spudger instead because it is ESD safe.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Talha Bin Amir

Mitglied seit: 23/10/17

653 Reputation

0 Kommentare