HP Spectre x360 13-4103dx Back Panel Replacement

Geschrieben von: Andrew Medeiros
  • Kommentare: 2
HP Spectre x360 13-4103dx Back Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

1 - 2 Minuten

Einleitung

This guide is for the HP Spectre x360 back panel replacement. The back panel is the foundation to your laptop. It protects the important components inside and gives the computer a base to sit on. This guide will help you replace the back panel, listing the steps to take the back panel off and replace it with a new back panel. You may need to use this guide when replacing any components inside of the computer or just to inspect the back components of the computer.

  1. Rs6AwEnuLBwcAIZK

    • Turn off your laptop before you start.

    • Flip your laptop so the bottom is facing upwards.

    * Do so gently, so that none of the internal parts are damaged, Its best to try to clean the backside of a laptop with a wipe to get rid of any dust or debris.

    Brett Kneeland -

  2. pefqgcArKRbVG62X

    • Use a Phillips #0 to remove the screws that hold the back panel down.

    Its best to be careful when taking out the screws so that none of them chip, and it would be good advice to consider using similar tools if the current tool number isn’t working.

    Brett Kneeland -

  3. koG2WXUOveh2yR2B

    • Use an opening tool to remove the back panel.

    • Be careful when applying force to the panel so the components and the panel are not damaged.

    • Try to start at a corner or a place with the most room to slide under the panel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew Medeiros

Mitglied seit: 25/10/21

511 Reputation

0 Kommentare