HP Spectre x360 15" (15t-ap000) Back Cover Replacement

Geschrieben von: Arthur Shi
  • Kommentare: 0
HP Spectre x360 15" (15t-ap000) Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

1 - 5 Minuten

Einleitung

This guide shows how to remove and replace the back cover for the HP Spectre x360 15t-ap000 laptop.

  1. AkrpJmVsv4GI11qL

    • Be sure to completely power off and unplug your laptop before you begin your repair. Make sure the laptop is not in standby, sleep, or hibernation mode.

    • Use a T5 driver to remove the following screws securing the back cover:

    • Six 4 mm-long screws

    • Two 7.8 mm-long screws

  2. OFZUVowZQdDD5CyM
    OFZUVowZQdDD5CyM
    AJp2qG1cWOhZd1kj

    • Use an opening tool or your fingers to pry up the back cover from the laptop.

    • Plastic clips hold the back cover lightly in place, so you may encounter some resistance.

    • If it feels like there is strong resistance, you may have a model that includes screws under the corner feet. Carefully pry the feet up to make sure they don't have screws.

  3. rCKU3hhkJQ4laN3U
    rCKU3hhkJQ4laN3U
    EauWqRWDPflcFsMM

    • Lift and remove the back cover.

    • During reassembly, gently press along the perimeter of the back cover to re-engage the clips.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Tinte & Feder

Arthur Shi

Mitglied seit: 03/01/18

218620 Reputation

0 Kommentare