Einleitung

  1. n2rhmBxEXG6V2yBa
    n2rhmBxEXG6V2yBa
    txQGFPX2hRvtFhdu
    • Unplug and turn off the HP Stream 11 before disassembling the device.

    • Pry off the two elliptical rubber inserts (one in each corner).

    • Pry off the two circular rubber inserts below the removed elliptical inserts (one in each corner).

  2. 1PMNZYFXOTHGUEKo
    • Remove the eleven 5.6 mm Phillips #1 screws.

  3. bQOtd153e3lfYJgQ
    bQOtd153e3lfYJgQ
    IuvAkyFWhZ6L1ZCD
    • Using an iFixit opening tool, pry open the case to separate the keyboard from the main body.

    • HP Stream 11s tend to be really difficult to open. If your device is not opening with a standard iFixit opening tool, use a nylon spudger, then the metal spudger, or a metal Jimmy as the last resort.

    • When using the metal spudger or Jimmy, be careful not to bring these tools into contact with any electronic components of the device as this can damage the device.

  4. OE12qoTwAGZrooIn
    • Slowly lift the keyboard as there are multiple ribbon cables that could easily be damaged if lifted with force.

    • Carefully lift the keyboard and locate the three ribbon cables connecting the main body of the laptop to the keyboard.

  5. OotCEBOdKWBQLr1L
    OotCEBOdKWBQLr1L
    WeorDiShDoLXjMCP
    aUNhrfBMZSGnb4JN
    • Using your fingernail, lift the flaps on the ZIF connectors that are securing the three ribbon cables.

    • Carefully disconnect the three ribbon cables.

  6. dA2FOQMiRJNpX4Am
    • Lift the keyboard out of the laptop to remove it from the device.

  7. kIyq1oTLaCPvpBYI
    • Pull ribbon out of daughterboard.

  8. jEUTeaKldERGZ1qR
    • Remove the 2 3mm screws.

  9. M5aH1A3oGBPyfOJW
    • Carefully remove daughterboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Riley Patrick Geoghegan

Mitglied seit: 03/10/22

193 Reputation

0 Kommentare