Einleitung

  1. h2mJqLZ15wONOVQW
    • Close the device.

    • Remove AC adapter plug from electrical outlet.

    • Remove AC adapter from device.

    • Turn the device off.

    • Unplug all external devices from device.

    • If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

  2. AYaOQMYexydDZ3fC
    • Turn the device upside down with the back facing towards you.

  3. ETnJiZWqoQyTZqIC
    ETnJiZWqoQyTZqIC
    SFaALv2MMTDVSuvW
    TP3gZUpcPs5EVqCd
    • Use a pick to remove the two (2) large computer feet along the back edge of the device.

    • Use a pick to remove the two (2) small computer feet.

    • Use a pick to remove the one (1) screw cover.

    • Place rubber computer feet in safe place for reassembly.

  4. uTSHQNEEoJYHYC6q
    uTSHQNEEoJYHYC6q
    5qjcMprZ1TRwSR5d
    WZdRVeuxUc6ugSiZ
    • Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.

    • Place the thirteen (13) screws on magnetic mat for reassembly.

  5. t6YAtjP5nwGoZayj
    • Turn the device over with the front facing towards you.

    • Open the device as shown.

  6. OJsrIM3VB2JmqHEG
    OJsrIM3VB2JmqHEG
    AothiSHKUXNS11iT
    FmFJDEnKRN16THkX
    • Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.

    • Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

  7. HRNqRUBhjXnXpqfi
    • Disconnect the Touchpad cable.

  8. DYiXSvHwtwNmELJq
    DYiXSvHwtwNmELJq
    yYPcqYciJDS4B45V
    • Disconnect the Keyboard Cable.

  9. 1u1ywkQOGZRSTICj
    1u1ywkQOGZRSTICj
    QnhRHjHKOjsLX4MN
    • Disconnect the Power connector cable.

  10. 5bFaloeknFkjiNMB
    • Remove the Keyboard/Top Cover from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jules Millward

Mitglied seit: 29/01/19

147 Reputation

0 Kommentare