HP dv5-1125nr Hard Drive Replacement

Geschrieben von: Nick Loey
  • Kommentare: 0
HP dv5-1125nr Hard Drive Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

10 - 25 Minuten

Einleitung

Before replacing your hard drive make sure you have backed up all of your files and have an OS install disk on hand. Now you're ready to replace your hard drive!

  1. BVWDRqLuKCIUWe32

    • Ensure your computer is shut down. Removing the battery while the laptop is still on may corrupt your files. Remove any power adapters and cords connected to the laptop body.

    • Slide the switch to the left until the release clicks.

  2. AlZXLwHFWXuuxSdX

    • Remove the battery.

    • The release switch may need to be held down while removing the battery.

  3. v6I3pGxfFpCNAa4g
    v6I3pGxfFpCNAa4g
    cbDYjfUUPipnhXf1

    • Remove the two 5mm Phillips screws on the hard drive cover using a Phillips #00 screwdriver.

  4. JmdjT5aYEyP1Sahi

    • Remove the plastic hard drive cover.

  5. TCPXOIwVesWdDCva
    TCPXOIwVesWdDCva
    ONviv1RCh3SsIfqd

    • Pull up on the two plastic flaps on the hard drive enclosure to remove it.

  6. dXAyr54CmTJREQ1P
    dXAyr54CmTJREQ1P
    2yjQ2CJiOcIQGvJR

    • Gently lift the ribbon cable away from the hard drive enclosure to free the drive.

  7. EUsXNlToBNFd3a6X
    EUsXNlToBNFd3a6X
    vrmKXBnY3UKVIXra

    • Locate four 2mm Phillips screws on the side of the enclosure and remove them using a Phillips #00 screwdriver.

    • Slide the hard drive out of the enclosure to complete the removal process.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Nick Loey

Mitglied seit: 01/04/14

1664 Reputation

0 Kommentare