HP rp5700 Cover Removal Replacement

Geschrieben von: Alyssa Briones

Kommentare: 1

Schwierigkeitsgrad

Very easy

Schritte

Zeitaufwand

2 Minuten

Einleitung

The computer case houses all the internal components of the computer that are essential to its operations. Certain cases may need thumb screw removal or maybe design so that they are tedious to be taken apart, however the HP rp5700 is designed to be easily disassembled.

Tip: If it doesn't come loose, wiggle it gently.

Schritt 1

Make sure the computer is unplugged.
Be sure to touch any metal surface with your hand to discharge any static electricity that might have built up.
Make sure all auxiliary cords are disconnected from the desktop. If not, remove them using your hands.
Set the desktop down horizontally with the front side facing you.

Schritt 2

Hold the desktop with two hands by grasping both sides of the desktop.
Press the buttons on both sides using your index fingers.

Schritt 3

Slide the top cover about an inch forward using your thumb to push it towards you.
Make sure that the bottom is still secured by both hands.
Lay the desktop back on the table and pull the case forward as far as it can go.
Lift the cover up and off.

In this step, make clear that the CPU is lifted in the air to aide in the cover separation. Cover removal for a CPU is usually the most time consuming step if not clearly outlined. Employ brevity but clarity.

Mark -