Einleitung

The loudspeaker is located within the back panel of the device. This makes it relatively simple to access.

  1. q3ebklL5WPivwktT
    q3ebklL5WPivwktT
    bBfWa21P4unRYtFc
    • Gently press the Release Button located at the bottom of the phone in order to remove the back panel of the device.

  2. JIwwmGSEDfwCNVJD
    • Once you locate the battery, look for a notch below it.

    • Gently insert your fingernails into the notch.

    • Lift the battery out of its recess.

  3. 1BiSW6BJq4xIPGtj
    1BiSW6BJq4xIPGtj
    5QcRn4oYogqWIwX1
    TTNgpvtrRrXbP2eN
    • Use the Torx T5 screwdriver to remove the 7 Torx Screws (3mm) attached to the back housing of the device.

    • One of the Screws may have a tape attached to it that says void. Removing this screw will void the devices warranty.

  4. VfH4fXaMr12E3faX
    VfH4fXaMr12E3faX
    15cBQjf3PxvsZJlK
    CNqs5CkZnCvb5EpM
    • Proceed to remove the back housing by using the spudger to gently unclip each clip holding the back housing in place and then lift the outer edges of the back housing

    • If you're having trouble opening the back try using the spudger to gently pry all around the panel before you attempt to remove it.

  5. 3h3BS1HNHoAxQs6M
    3h3BS1HNHoAxQs6M
    Es5JN61dmc1LLSBP
    • Now simply remove the back panel by gently pulling. This will make it easier to access the devices internal components.

  6. 2sc2r5EFe1BI5wKZ
    2sc2r5EFe1BI5wKZ
    4PL6UnYRTMQwExJh
    6p2HMLNOpMNWUh4p
    • Turn the back panel over to access its interior, and locate the loudspeaker marked in the picture.

    • Remove it by gently pulling with the precision tweezers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Akshat Shah

Mitglied seit: 26/09/16

368 Reputation

0 Kommentare