HTC Desire 826 Screen Replacement

Find a seam in the back of the device.

Insert the plastic spudger into the seam and pry off the back panel.

Remove the 4.0 mm screw above the battery with a T5 Torx screwdriver.

Remove the metal bracket with the tweezers.

Disconnect the battery cable from the motherboard with the tweezers.

Lift the battery with a plastic spudger and remove it from the device.

Remove the two 4.0 mm screws attaching the bottom plastic panel using a T5 screwdriver.

Remove the black plastic cover using a plastic spudger

Use tweezers to pry the wire up from the battery bed

Detach the ribbon cable by pulling with the tweezers where circled in blue

Flip the phone over so the screen side is facing up for the next step

Use the metal spudger to pry up the plastic cover pieces from the front of the phone

Pry up the edges of the screen using the metal spudger

Then use the suction cup to remove the screen from your device