HTC HD2 Vibrator Replacement

Carefully pull the rear cover from the back of the phone.

Place a finger beneath the small lip on the left side of the battery.

Lay the phone down on it's screen.

Lift up on the lip and pull the battery from the phone.

Remove the four black 3.5mm T5 screws from the back of the phone.

Insert the flat end of a spudger between the midframe and the display.

Slide the spudger along the seam between the frame and the display.

Using the spudger for leverage, carefully pry the midframe away from the display assembly.

As it releases, pull the midframe away from the phone.

Set the phone down on its screen.

Using tweezers, unplug the small vibrator connector from its socket on the motherboard.

Pull the vibrator motor from the phone.