Hair Dryer Grating Replacement

Geschrieben von: Mitch
  • Kommentare: 0
Hair Dryer Grating Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

  1. jXYWKeLalGIRo2ND
    jXYWKeLalGIRo2ND
    niF4mYomOQRFhxWb

    • Remove the black air concentrating nozzle (shown in the red circle) by gently twisting and pulling the nozzle.

    • If nozzle is not attached, skip to next step.

  2. ihVDFXJNUNy3D6lH

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

  3. VMSxyYmMHo2ZWZdJ

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

  4. ViLGEHJoRRPUnaQY

    • Separate the hair dryer grating into the three pieces seen in the image.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Mitch

Mitglied seit: 04/10/12

34 Reputation

0 Kommentare