Hamilton Beach 51101BA Blades Replacement

Geschrieben von: Brandon Nunez
  • Kommentare: 5
Hamilton Beach 51101BA Blades Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

2 Minuten

Einleitung

After using this guide you will learn how to replace the blades in your blender. You will need to use basic tools to complete this guide.

  1. JTFqgS1rVoSULOws

    • Remove the lid from the container by holding the base and pulling up on the lid.

  2. rCSHslEGxvYNq3ZV
    rCSHslEGxvYNq3ZV
    BNRrTAWeBYcmm3vZ
    eODKURjeNYvmSjQn

    • Remove the container from the blender.

    • Hold the blender and the container, then twist the container in a clockwise motion.

    • Make sure to follow the lock and unlock markings on the container.

  3. mQ4ouRk5ynQODNIy
    mQ4ouRk5ynQODNIy
    12GpaVh3GcVRIMN6
    CFkdgTMkwiNLUbAL

    • Avoid placing your fingers on the blade, as they could be sharp.

    • Using a pair of pliers to hold the blade in place, use your other hand to unscrew the rubber piece on the bottom of the container.

    • Remove the rubber piece and the two washers by rotating the rubber piece counter-clockwise.

  4. sLaprrrPLG3O2cjH

    • Carefully, pull the blades out of the container as they are very sharp.

    • Using the pliers, remove blades and the washer around the blade shaft.

    Dear Brandon, thank you for that guide. Please, do you know where I can find the spare blades for replacement? Thank you and all the best.

    Patricia (Brazil)

    Patrícia Garcia -

    Thanks! It seems really gross that the blade isn't easily removed for cleaning :)

    ice-lady -

    In my blender, the whole blade assembly, including the base where the blade sits, got dislodged. This makes the content leaks to the bottom like a water falls. How to repair it?

    Joy A. Aquino -

Abschluss

To reassemble your device with the new blade assembly, follow these instructions in reverse order.

Tinte & Feder

Brandon Nunez

Mitglied seit: 28/08/15

283 Reputation

2 Kommentare

Need to know how to install parts and how many

papi3701@aol.com -

Looks like I missed parts need to know the order son cuantaty

papi3701@aol.com -