Einleitung
In this guide you are going to learn how to take out the current power cord in order to replace it with a new one.
Werkzeuge
-
-
Remove container from base.
-
Hold the blender and the container, then twist the container in a clockwise motion.
-
-
-
Turn the blender so the bottom is facing you.
-
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.
-
Abschluss
To reassemble your device, you must solder the new power cord to the thin black and thin gray wires, and follow the steps in reverse order. Requires soldering skills.
