Handspring Visor Edge Back Panel Replacement

Geschrieben von: Nick Lazarakis
  • Kommentare: 0
Handspring Visor Edge Back Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 Minuten

Einleitung

The only tool needed is a #00 Phillips Screw driver.

  1. tEKoGQZsFrcuCTwE

    • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

  2. nyfOtUGYbEddVfjC

    • Remove the gray back plate from the PDA.

  3. tKD1NBSQmbcEgDmO
    tKD1NBSQmbcEgDmO
    bQkWKp1RSmP2cVkK

    • Remove the four 2.6 mm Philips screws that are on the sides of the frame.

    • Remove the 3.9 mm Philips screw holding the stylus holster to the frame.

  4. eVBHWGZ1GcntvSyw
    eVBHWGZ1GcntvSyw
    aElQdqUNMHMa2VVe

    • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

  5. BjNOalaltV2Ra1fy

    • Remove the white frame from the back of the PDA.

    • The frame may get stuck on the corners so be very gentle when working the corners off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Nick Lazarakis

Mitglied seit: 24/01/11

331 Reputation

0 Kommentare