Hasbro Bop-It Micro Series Back Case Replacement

Geschrieben von: James Schnabel
  • Kommentare: 0
Hasbro Bop-It Micro Series Back Case Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

10 Minuten

Einleitung

Prerequisite Only

  1. e2Nl3KmHtwdPU22N

    • Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

  2. sGcKSWnUL43NLku1

    • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

    • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

  3. qvUGEJ2vd6llJ6Ob

    • Carefully separate the two sections, leaving them connected by the wires.

Tinte & Feder

James Schnabel

Mitglied seit: 29/09/16

139 Reputation

0 Kommentare