Hasbro Bop-It Micro Series Speaker Replacement

Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

Carefully separate the two sections, leaving them connected by the wires.

Remove the (3) #3 Phillips head 6 mm screws using your Phillips #0 screwdriver, and remove the plastic with your fingers.

De-solder the speaker from the wires. Refer to the soldering guide for instructions on how to solder