Einleitung
If you need to replace the motherboard inside of the earbud, this guide will demonstrate how to get into the earbud itself and access it.
-
-
Use a spudger or a pick and insert it into the small hole on the back side of the earbuds. Use it to pry the two halves of the earbud apart gently.
-
-
-
Use a spudger to lift the motherboard out of the earbud gently. This should reveal the backside of the motherboard.
-
-
-
Now on the backside of the motherboard, detach the small red and black wires attached on the speaker to the motherboard using a spudger.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
