Hitachi CP-X2010N Top Panel Replacement

Geschrieben von: Chance Kidd
  • Kommentare: 0
Hitachi CP-X2010N Top Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

3 - 5 Minuten

Einleitung

The top panel houses and protects the projector's sensitive internal components. If there is any damage to the top case, it may need to be replaced. Removing the top panel is also necessary to replace most of the internal components for the Hitachi CP-X2010N.

Before removing the top panel, ensure the device is powered off and unplugged. Also make sure that the projector has cooled off if it has recently been used as it could become warm after prolonged use.

  1. xXATVU1rcxCJfvsw
    xXATVU1rcxCJfvsw
    rXeZpFZ1MwAwEfBR
    hIaO1JagDNK2dFls

    • Flip the projector upside down to expose the screws on the underside.

  2. eoSPMRBBISUnPiZD
    eoSPMRBBISUnPiZD
    ZqTlJfPTFP4xuYaX
    YxgpLmRSHcidxrLh

    • Use a Phillips #2 screwdriver to remove eight black 14 mm screws holding the top panel to the main projector body.

  3. EQPbX41dVNCx1YBd

    • Flip projector right side up and orient it so you are facing the rear panel.

  4. HuTGXeJlLspaLkpl
    HuTGXeJlLspaLkpl
    YLS4diBeXkOVNXx3
    VyAatWA1QyPAJsUY

    • Use a Phillips #2 screwdriver to remove two silver 22 mm long screws.

    • Use a Phillips #2 screwdriver to remove the short silver 10 mm screw.

  5. lHXlSTcMlUETK5T2
    lHXlSTcMlUETK5T2
    gXSq5ZNWelI2MQLk
    VqtjGFK4RMLBkj2n

    • Carefully lift the top panel from the body of the projector, making sure it doesn't catch on anything.

    • Remove the panel from the body of the projector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Chance Kidd

Mitglied seit: 20/09/22

1184 Reputation

0 Kommentare