Honda 6500 Watt Generator EG6500CL AT Brush Assembly Replacement

Geschrieben von: Arthur Shi
  • Kommentare: 0
Honda 6500 Watt Generator EG6500CL AT Brush Assembly Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

5 - 15 Minuten

Einleitung

This guide shows how to remove and replace the brush assembly for the Honda 6500 Watt Generator EG6500CL AT.

  1. DmxWmIMhwA22AFBe
    DmxWmIMhwA22AFBe
    XBJ2c5RKBUW5ea1u

    • Before you work on the device, make sure to switch the engine off.

    • Switch the circuit breaker off.

  2. FdF22f2xXhCGrGpE
    FdF22f2xXhCGrGpE
    AG6kDCtri5JHyGkh

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  3. S1gJ5ahkvBXNmtZD
    S1gJ5ahkvBXNmtZD
    g6SVhTiJQDAQj3Dt

    • Twist the fuel valve clockwise into the cutoff position.

  4. etQSbfRFh1Yjq4N3

    • Use a Phillips screwdriver to remove the two screws securing the generator cover.

  5. TYqGfUcnjb2tinLw
    TYqGfUcnjb2tinLw
    Fcer6BLwJKyuuXUQ

    • Remove the generator cover.

  6. EslJgotqXgYl5Pbt
    EslJgotqXgYl5Pbt
    RH3K6NiBjQMlOA5J

    • Squeeze and disconnect the stator connector from the wiring harness.

  7. NXwHxa4LmKqJAqlT
    NXwHxa4LmKqJAqlT
    thXBiVEuTh32KwjG

    • Use a 10 mm socket to remove the bolt securing the brush assembly.

    • Pull the brush assembly out slightly from its recess.

  8. I2kHrJTyZXb3eWWN
    I2kHrJTyZXb3eWWN
    im6HqylmG5YlOMX2

    • Disconnect the two spade connectors from the brush assembly.

  9. UumErbFwi6qahfV3
    UumErbFwi6qahfV3
    xVpVFMwYhEIkDvLP

    • Remove the brush assembly.

    • During reassembly, use the second photo as reference for how to wire the brush assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Arthur Shi

Mitglied seit: 03/01/18

218620 Reputation

0 Kommentare