Honda 6500 Watt Generator EG6500CL AT Stator Cover Replacement

Geschrieben von: Arthur Shi
  • Kommentare: 0
Honda 6500 Watt Generator EG6500CL AT Stator Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

5 - 10 Minuten

Einleitung

This guide shows how to remove and replace the stator cover for the Honda 6500 Watt Generator EG6500CL AT.

This guide shows the stator with the rear generator cover removed. You do not need to remove the generator cover in order to replace the stator cover.

  1. DmxWmIMhwA22AFBe
    DmxWmIMhwA22AFBe
    XBJ2c5RKBUW5ea1u

    • Before you work on the device, make sure to switch the engine off.

    • Switch the circuit breaker off.

  2. FdF22f2xXhCGrGpE
    FdF22f2xXhCGrGpE
    AG6kDCtri5JHyGkh

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  3. S1gJ5ahkvBXNmtZD
    S1gJ5ahkvBXNmtZD
    g6SVhTiJQDAQj3Dt

    • Twist the fuel valve clockwise into the cutoff position.

  4. xSjTZsSivLCCoUwW
    xSjTZsSivLCCoUwW
    xUEvpYK46IjwXcXu

    • Rotate the stator cover so that the seam is at an accessible angle.

  5. d2XNUfGpDXn61sRk
    d2XNUfGpDXn61sRk
    TxF5dsYOfwdtA6FH
    mWHqiGfA3AX2aYda

    • Use a flathead screwdriver to pry up the tabs holding the stator cover together.

  6. M6Pa5g6RMBrXOFSM

    • Remove the stator cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Arthur Shi

Mitglied seit: 03/01/18

218620 Reputation

0 Kommentare