Honda Rear Tine Tiller FRC800K1A Rotary Tines Replacement

Geschrieben von: Carsten Frauenheim
  • Kommentare: 0
Honda Rear Tine Tiller FRC800K1A Rotary Tines Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

Keine Schätzung

Einleitung

This guide shows how to remove or replace the rotary tines on a Honda FRC800K1A Rear Tine Tiller.

You may need to support the tiller during this process. Use jack stands, large pieces of wood, or other strong supports. Rock the tiller back and forth on its supports before beginning to ensure that it won’t fall or tip over during repairs.

  1. W64s14UYWLflrhJu
    W64s14UYWLflrhJu
    VR5CMjfaIqSoDspN

    • Before you begin the repair, disconnect the spark plug wire.

    • Firmly grip the base of the connector and pull it away from the spark plug to disconnect it.

  2. KesuYQwmhQaDFSKY

    • Flip the fuel valve switch to the off position.

  3. 1BPGFcfwJ1KOZiEM
    1BPGFcfwJ1KOZiEM
    HDxThvpElgsONgGI

    • Use a 12 mm socket and wrench to remove the six sets of side guard bolts and nuts, three on each side.

  4. y4FF4R6AfRKIGmXt
    y4FF4R6AfRKIGmXt
    SCmiC2wZlcSYjFDR

    • Slide the side guard off of the curved main guard to remove.

    • Repeat the same process on the opposite side.

  5. FATrjFqAJmeTYcgV

    • Use a 14 mm socket to remove the two rotary tine retaining bolts.

    • Repeat the same process on the opposite rotary tine.

  6. SR1WRHIPjBqcNxyp
    SR1WRHIPjBqcNxyp
    lAw2cnThFUlrBplf
    gufNjagTqvFpo1GY

    • Slide the rotary tine off its axle to remove it.

    • Repeat the same process on the opposite rotary tine.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Carsten Frauenheim

Mitglied seit: 10/03/20

88317 Reputation

0 Kommentare