Honda Rear Tine Tiller FRC800K1A V-Belt Replacement

Geschrieben von: Carsten Frauenheim
  • Kommentare: 0
Honda Rear Tine Tiller FRC800K1A V-Belt Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

15 Minuten

Einleitung

This guide shows how to remove and replace the V-Belt on a Honda FRC800K1A Rear Tine Tiller.

  1. W64s14UYWLflrhJu
    W64s14UYWLflrhJu
    VR5CMjfaIqSoDspN

    • Before you begin the repair, disconnect the spark plug wire.

    • Firmly grip the base of the connector and pull it away from the spark plug to disconnect it.

  2. KesuYQwmhQaDFSKY

    • Flip the fuel valve switch to the off position.

  3. Jo3621gfqkErQmHr

    • Use a 14 mm socket to remove the bolt securing the outer belt cover.

  4. Ho1bStsBJmWDyUWt
    Ho1bStsBJmWDyUWt
    hfDvvQNNhweqRRNt
    4vAZ5wT4FSa4FnWN

    • Tilt the outer belt cover down and pull it off of the lip on the inner belt cover to remove it.

  5. u1aDgNVH1dXcIcvD
    u1aDgNVH1dXcIcvD
    jYjCdeLIvhUmXLf2
    CMFibNJsiKYhxCVa

    • Push the V-belt towards the transmission pulley to release tension.

    • Slip the V-belt off of the groove in the pulley.

  6. R5GjvA3FWh3eXASM
    R5GjvA3FWh3eXASM
    MLUQRxYepdaVrgmi
    RUhFTYXHtPPs15Yv

    • Pull the V-belt down and out of the way of the two-prong belt guide.

    • Push the V-belt around and off of the motor pulley to remove.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Carsten Frauenheim

Mitglied seit: 10/03/20

88317 Reputation

0 Kommentare