Hoover LiNX The Motherboard Inside The Handle Replacement

Geschrieben von: Sara Vlhova
  • Kommentare: 0
Hoover LiNX The Motherboard Inside The Handle Replacement

Schwierigkeitsgrad

Easy

Schritte

9

Zeitaufwand

10 Minuten

Einleitung

This guide will show you how to open dissemble the handle and replace the motherboard. You might need to do this if the device has power but fails to turn on. Remember to remove the battery from the device.

  1. BKhKuEOaIFfvtmHM

    • Remove the single 15mm Phillips #1 screw from the handle.

  2. fXDJstGKVaxngcYR

    • Remove the handle by pulling it up.

  3. iBxVcx5CuECdGmKa

    • Remove two 15mm Phillips #1 screws from the handle.

  4. WZCIXchZv4lyGVNk
    WZCIXchZv4lyGVNk
    dGPTrfQ1RHwQiKov

    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  5. CvVhFWgWYZDqnobV
    CvVhFWgWYZDqnobV
    6DsApIQKGUJsgH4A

    • Remove five 15mm Phillips #1 black screws from the handle.

  6. SPu3Ue2AecHoyeod
    SPu3Ue2AecHoyeod
    BBKEncCDcnwQtaMl

    • Remove the silver plastic cover using the plastic opening tool.

  7. UoShHSdaFLPqNQgU

    • Remove the black rubber cover from the motherboard.

  8. 1MfSCaqHv2iYrSTq

    • Remove two 8mm Phillips #1 screws from the motherboard.

  9. lNdiuslw2PFCF2yG
    lNdiuslw2PFCF2yG
    vcgbXUrwoQHB1fE6

    • Carefully pull the motherboard out with its attached wires.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sara Vlhova

Mitglied seit: 25/01/18

541 Reputation

0 Kommentare