Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement

Geschrieben von: Nathan Yung
  • Kommentare: 0
Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

1 - 2 Minuten

Einleitung

This guide will help you into replacing the inlet filter in the body of the vacuum.

Werkzeuge

  1. 3LodxQ2OcAEjgRPV
    3LodxQ2OcAEjgRPV
    PStNlCLrKIoHhidW

    • Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.

  2. WOKMRIQNIPQqRMXB
    WOKMRIQNIPQqRMXB
    DQV3p5PIUI2QUVJY

    • Locate the large sieve at the bottom of the vacuum body.

    • Lift off the sieve, separating it from the filter.

  3. TkefwVBcSuO1wOcC

    • Remove the old inlet filter from the vacuum body and replace with the new filter.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Nathan Yung

Mitglied seit: 19/01/18

241 Reputation

0 Kommentare