Hover-1 Charger Unplugging the Battery

Geschrieben von: Benji Forest
  • Kommentare: 0
Hover-1 Charger Unplugging the Battery

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

If you need to disassemble your Hover-1 Charger (H1-COL), you should first refer to this prerequisite guide on how to disconnect the battery. To protect yourself and the hoverboard’s electronics, you need to unplug the battery before you begin to disassemble any other part. This guide is used as a prerequisite guide and does not replace any component of the hoverboard.

  1. tPEJJAW2XKJAFBEk
    tPEJJAW2XKJAFBEk
    PjRVO5AJeCeWXCpb

    • Flip the hoverboard over so that the warning label is facing up.

    • Remove the twelve 12 mm screws with a Phillips #2 screwdriver.

    • Remove the four 10 mm screws with a Phillips #2 screwdriver.

    • The screws nearest to the wheels may be hard to access. Be sure to use a long, thin screwdriver.

  2. De4KJBa5UfAGAiq4

    • Pull the right cover away from the hoverboard to expose the battery.

  3. MXbD2SL4xUrnYkRv
    MXbD2SL4xUrnYkRv
    tKFZYcBtVyM42J1S

    • Disconnect the two pronged black and yellow cable.

  4. QrCBWs6Jmva3ivyK

    • Pull the left cover away from the hoverboard.

  5. 2wQdVCkN6nOXQJnL
    2wQdVCkN6nOXQJnL
    QEaN1Aoiwvbn4Ows

    • Disconnect the two pronged black and yellow cable. The battery is now fully disconnected.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Benji Forest

Mitglied seit: 10/10/19

263 Reputation

0 Kommentare