Hover-1 H1 LED Headlight Replacement

Geschrieben von: Sara Passantino
  • Kommentare: 0
Hover-1 H1 LED Headlight Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

15 - 25 Minuten

Einleitung

This guide explains how to replace the LED headlights on your Hover-1 H1 hoverboard.

  1. CnWFkk1BJPRa2Lio

    • Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

    • Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

  2. ZkCHDORttn6GSQOh

    • Puncture the two black stickers by using the tip of a screwdriver.

    • Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

  3. VjDfPrZd2XnstwhP
    VjDfPrZd2XnstwhP
    FXuOfl4YUAdC46C3

    • Lift each side of the bottom shell by pulling up.

    • When lifting the shell, take care to not tear any cables from their connectors.

  4. WvblXP2vPSkx1HPx

    • Unplug the battery by pulling gently on both sides of the orange connector.

  5. BAWTUAfJXSSFLUuG

    • Unplug the lights from the battery by pulling gently on both sides of the black connector attached to the white wires.

  6. 3CpOLlXtncGHHQYq

    • Remove the vertical light from the shell by using your hands to pull it free from the surrounding shell.

  7. UwaByEhEmYAZQ6un

    • Remove two 8mm screws using a Phillips #0 screwdriver to rotate the screws counterclockwise.

    • Remove the horizontal light by using your fingers to pull the light up out of the shell.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sara Passantino

Mitglied seit: 08/10/18

326 Reputation

0 Kommentare