Hover-1 Horizon Base Plate Replacement

Geschrieben von: Jenny Dyer
  • Kommentare: 0
Hover-1 Horizon Base Plate Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 Minuten

Einleitung

To access the internal components of the hoverboard, the base plate must be removed. This guide will show you how to remove the base plate of your Hover-1 Horizon.

  1. wef5PQQeoVqct5fA
    wef5PQQeoVqct5fA
    VnWAZv3ULWi2HpYH

    • Remove the six 12mm Phillips #2 screws holding the base plate.

  2. bv2ddOjtHCbES1Y2
    bv2ddOjtHCbES1Y2
    2vC1sW2n5c16M5XW

    • Remove the two 11mm Phillips #1 screws that hold the base plate to the body.

  3. yJ3y3DX1xQnkUeVG
    yJ3y3DX1xQnkUeVG
    UV5VTy2cTv6fjnfG
    QZeiIAAD2mOFWjFK

    • Remove the base plate by lifting it up.

    • The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jenny Dyer

Mitglied seit: 08/10/18

235 Reputation

0 Kommentare