Hover-1 Maverick Motherboard Replacement

Geschrieben von: Cassandra Aarrestad
  • Kommentare: 0
Hover-1 Maverick Motherboard Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

20 Minuten

Einleitung

This guide for the Hover-1 Maverick guides users in replacing the motherboard in their device. The motherboard is crucial within the hoverboard. It controls all functions and acts as a medium for communication between parts in the device. Symptoms of having a faulty motherboard include the device being unable to balance, unable to hold a charge, has flashing lights, or has trouble powering on. Users need to disconnect the battery and the wires in order to replace the motherboard.

  1. 2vugCAUUbpwBLRq3
    2vugCAUUbpwBLRq3
    TsSGUyCpMh4ppKWx
    LMt3CTWEUl1vi4y5

    • Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

    • Open the shell.

    • There is one motherboard on each side of the device located near the wheels.

  2. F2HR6vpgBEFyQWCS
    F2HR6vpgBEFyQWCS
    bBcVaiIT1mtbtrKo

    • Disconnect the battery to prevent any electrical currents from coming through the wires.

  3. JNu4LYGqZgKBlIWy
    JNu4LYGqZgKBlIWy
    HMvbNX1xFYQGMZ1V

    • Squeeze and pull on the wires to detach them from the motherboard.

  4. l1o2fOoXwogs5ylh
    l1o2fOoXwogs5ylh
    rFIdYrOP5PlPvVIX

    • Remove the four 8mm Phillips #1 screws.

    • Remove the motherboard from the device.

    • Repeat for the other motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Cassandra Aarrestad

Mitglied seit: 23/01/20

621 Reputation

0 Kommentare