Einleitung
The needle that punctures the K-Cup beverage canister can sometimes become clogged with coffee particles. Take caution as this needle is very sharp and can cut skin.
Werkzeuge
-
-
Remove K-Cup Pack Holder Assembly by pinching the left and right sides to release clamp. Wiggle slightly to remove
-
-
-
Pull and snap apart the funnel from the K-Cup Pack Holder (If this is the first time separating the Pack Holder Assembly, more force may be required)
-
-
-
Insert a paperclip or other small, sharp object into the bottom of the K-Cup Pack Holder needle compartment to clear out any debris. If debris is too dry and compact, perform this step under running water to loosen the debris
-
Flip K-Cup Pack Holder and repeat
-
-
-
With the Lid still open, locate the Puncture Needle. Insert a paperclip or other small sharp object into the Puncture Needle Holes to remove any debris trapped inside
-
To reassemble your device, follow these instructions in reverse order.
Once reassembled, run the brewer once or twice with just water to cleanse the system.
2 Kommentare
I used the needle but it fell into the area. How do I get the needle out?
The bottom needle is loose on small piece of plastic is this normal or broke?