Einleitung
Here is a method in order to clean under the chamber screen despite this screen not being removable.
This method was given by a Topgreen/Xmax Company Rep on Reddit
-
-
Pour a small amount of ISO(isopropyl alcohol) in the loading chamber (unit off, battery removed), and stop adding ISO if you notice it's flowing by the air inlets (you can wrap a paper towel around the device body right under the air inlets in order to absorb the excess ISO.
-
Let the ISO have enough time to get all the resin dissolved, invert the device upside down, and use paper towels to soak up the solution.
-
You can repeat that process until the ISO comes out clear and transparent, this is the sign the heating chamber is now clean.
-
Before using your V3Pro again, you must let it dry overnight in a vented area.
-
To reassemble your device, follow these instructions in reverse order.
