Einleitung
Passionate about your dog? Unable to take them out because their Flexi leash is no longer retracting? Successful maintenance of a Flexi dog leash requires knowledge of how to reuse and fix your screw-less leash. With only a screwdriver and 15 minutes of your time, you will learn how to repair the retracting mechanism in your screw-less Flexi brand retractable dog leash to make it usable. This guide will minimize waste and help you save money on buying a brand new dog leash.
Werkzeuge
-
-
Locate the detachable T-shaped opening at the bottom of the dog leash.
-
Insert a pry tool into the bottom of the "T".
-
-
-
Insert fingers into the gap made by the screwdriver and pull apart.
-
Completely separate the two halves of the case.
-
-
-
Examine the exposed components.
-
Leash Roll
-
Leash Rope
-
Leash Lock
-
Detachable hole that allows the rope out of the case
-
-
-
Lift up the detachable hole that allows the rope out of the case. Remove it from the case and place it aside.
-
-
-
Examine the coil of the rope around the roll to spot any issues.
-
Unravel the rope from the roll in a counter-clockwise motion.
-
Remove any tangles, twists, knots, or debris interfering with the rope.
-
-
-
Let the rope wind back up, making sure to keep it aligned, straight, and flat against the roll.
-
-
-
Replace the detachable hole that allows the rope out of the case into its slot at the top of one of the case halves.
-
-
-
Place the leash lock back into its place behind the detachable hole that allows the rope out of the case, and on top of the spring.
-
-
-
Find the locking screws on both halves of the cases.
-
Align the locking screws with their corresponding holes.
-
Place the two case halves atop one another and clamp the two halves together.
-
