How to Fix a Torn Slipper

Geschrieben von: jia liu

Kommentare: 0

Schwierigkeitsgrad

Easy

Schritte

Zeitaufwand

10 - 40 Minuten

Einleitung

Slipper is an indoor shoe that is used every day in your household, due to how often this is used, it can easily be torn. even it can easily be bought, fixing it will be a much cheaper way and can reduce the trash of the thrown-out slipper.

this guide is aimed at helping you fix it.

Werkzeuge

Ersatzteile

Soft Cloth

Schritt 1

Use glue to glue up the torn part of the vamp (the top part of the shoe)
This is done to make it easier for the later stage. if the vamp wasn't broken, this step can be skipped.

Schritt 2

Grab a piece of cloth and measure the amount needed to fix your shoe and cut it out.

Schritt 3

Glue the piece of cloth onto the shoe.
This step isn't needed if you are a pro, glue was used for holding the shoe and the cloth for easy sewing.

Schritt 4

Now poke your thread over your needle
After you poke your thread into the needle, start sewing back and front, sew all the way around the cloth.
Be careful not to poke your hand while you are sewing

Schritt 5

Use glue to hold the vamp and the bottom of the shoe together.
This is similar to step 3, if you are a pro with sewing you can skip this step.

Schritt 6

Now sew the top and bottom of the shoe together. Poke in from the side and down the bottom again and again.
If it is hard to poke through, you can always use something hard to help with pushing the needle through.