Einleitung
The lower tray on the WORX Pegasus is a substantial part of the assembly as it prevents the legs of the bench from spreading apart while adding stability.
Sometimes these trays become accidentally detached from each other, either partially or completely, preventing you from fully opening the bench.
Fortunately, there is an easy and permanent fix for this.
Werkzeuge
Ersatzteile
-
-
If yours became detached, make sure you manually re-assemble the tray as it is supposed to be
-
-
-
Drill a small hole, the smallest possible but large enough to allow a zip tie to go through. I used a 1.5mm drill bit.
-
-
-
Route a Zip Tie through the hole you just drilled and around the hinge barrel.
-
Cut the excess with scissors or wire cutters.
-
Do this procedure on two hinges: the leftmost and rightmost.
-
-
-
If done correctly, the tray is not going to fail again.
-
This fix also adds a little bit more strength to the lower tray.
-
Enjoy!
-
