Einleitung
Most leaks in modern automotive tires are caused by a foreign object—usually a nail or screw—puncturing the tire through the tread. This type of leak can be repaired by removing the object and inserting a rubber plug into the hole left behind.
Werkzeuge
-
-
Window cleaner or soapy water sprayed on the tire is a quick method for identifying the location of a leak. Always check the valve stem in addition to the tire itself.
-
-
-
Once you've identified the leak, prepare the tire and plug before removing the foreign object causing the leak (usually a nail or screw)
-
Prepare your tire plug by feeding it through the eye of the insertion needle before pulling any objects from the tire that maybe causing leaks.
-
Make sure your tire is well inflated. Inflate it to the maximum listed on the tire sidewall.
-
-
-
Remove the foreign object with pliers or a similar tool.
-
Immediately insert the reamer to plug the hole.
-
Without removing it, plunge the reamer into the tire several times to make a uniform hole.
-
Leave the reamer inserted in the tire until the needle with plug is ready to insert.
-
-
-
Insert 90% of the plug into the tire, leaving just short ends exposed.
-
Pull the needle out slowly, leaving the plug in the tire.
-
-
-
Trim the plug ends flush with the tire.
-
Recheck for leaks with window cleaner or soapy water.
-
Reset your tire pressure to the correct specification for your vehicle.
-
To reassemble your device, follow these instructions in reverse order.
