How to Position a Vernier Caliper

Geschrieben von: James Schreiber
  • Kommentare: 0
How to Position a Vernier Caliper

Schwierigkeitsgrad

Very easy

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

These instructions will cover the techniques for measuring external & internal features, as well as heights and depths.

  1. XCDoRFhmSOBQRYll
    XCDoRFhmSOBQRYll
    odN3DRjEsCBnJdj3

    • Use the metal wheel contacting the measured surfaces.

    • This will allow for a more repeatable measurement.

    • Extend the calibration life of the device. Preventing damage to the measuring surfaces or measured part.

    • Make use of the locking mechanism.

    • Occasionally the device has to be positioned in a way that cannot be read.

    • Always prioritize comfort. If there is a change the jaws can move when attempting to read. Lock the device. Move it to you.

    • Ensure the part is secure, use flat surfaces, try to use the vernier comfortably with both hands.

  2. 6RGcBARDlWNItElo
    6RGcBARDlWNItElo
    TaIIbHwpGXhsKFdu
    BbRLQZRCQ1u4O3Z1

    • External features are measured as shown.

    • These sections of the jaws have a knife edge,

    • Used to measure smaller features with low clearances.

    • These sections have a flat edge.

    • Used to measure larger features with perpendicular surfaces.

  3. DOY3vIVkfrM5lNb2

    • Internal features are measured as shown.

  4. wmo5CN36VtAFNnNu
    wmo5CN36VtAFNnNu
    3PINAnJXdk5avkCa
    vSk4fBIxZIB2VQFZ

    • Heights of steps are measured as shown.

    • Butt the head of the caliper against one surface.

    • Butt the head of the slider against the other surface.

  5. oXUC2AeaCueuqHeM
    oXUC2AeaCueuqHeM
    h4KCQLBhGothSSGT

    • Depth of holes are measured as shown.

    • Position the blade to the center of the hole.

    • Hold the end of the caliper flush the surface of the hole.

    • Extend the slider until the blade bottoms out the hole.

Abschluss

Happy Measuring

Tinte & Feder

James Schreiber

Mitglied seit: 01/07/17

224 Reputation

0 Kommentare