Einleitung
Prerequisite-only guide to make sure the Barreto Trencher E718MTH4S 2016 is off and immobilized prior to servicing.
-
-
Make sure that both ignition switches are turned to the off position. There is one on the engine and one on the control panel.
-
Pull the ring near one of the wheel hubs straight out, away from the wheel.
-
Rotate it so that the small roll pin lines up with its slot.
-
Release the ring so that the lock pin slides into the wheel. You may need to rotate the wheels a little before the lock pin fully engages.
-
Repeat this step so that the lock pins on both wheels are engaged.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
