Einleitung
This guide will show you how to extract a screw that has broken while being embedded inside its hole, along with showing you how to replace it with a new one. This process works for screws inside walls, pieces of lumber, or metal. The guide requires a couple of power tools, so you should always use the necessary precautions when using them to avoid any injuries.
Werkzeuge
-
-
Use an angle grinder to grind the tip of the broken screw until its surface is smooth and even.
-
-
-
Place a center punch in the middle of the tip of the screw.
-
Use a hammer to hit the center punch to make a dent in the center of the embedded screw.
-
-
-
Place a center drill bit in the dent made in the previous step and start drilling until it expands enough to fit the standard drill bit inside it.
-
-
-
Make a hole in the tip of the screw by drilling with a standard drill bit.
-
Keep drilling until the hole reaches near the end of the screw.
-
-
-
Using a wrench, unscrew the extractor.
-
The screw will come along with it, freeing the hole.
-
