How to Repair a Broken Leather Belt Using Adhesives

Geschrieben von: Christopher Fowler
  • Kommentare: 0
How to Repair a Broken Leather Belt Using Adhesives

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

1 - 2 Tage

Einleitung

Do you have a favorite belt? One that has been with you for ages but has become separated at the area of the buckle? This Fast Fix will guide you through returning your favorite belt back to proper working condition using an adhesive that works with leather.

This Fast Fix repair guide focuses on a technique that can be applied to a generic full grain leather belt or other similar full grain leather items that are joined together. Some of these leather items are sewn together originally, but over time as they are worn the leather stretches so the original thread holes may not line up to be re-sewn. Using an adhesive that is rated for use on leather can restore the item back to a usable condition.

When completing this Fast Fix, always pay attention to all warnings and cautions on the label of store-bought leather cleaner and leather adhesive. These chemicals often have harmful vapors and are flammable so make sure to complete this project in a well-ventilated area away from heat sources and sparks.

Let's get started!

  1. iC4yB5w2MXjMXgRh
    iC4yB5w2MXjMXgRh
    NsaPIOLREyGkbuXv

    • Use a small soft bristled brush to remove dirt and debris from surfaces to be joined together with adhesive.

  2. QUWsHaGQZRenKCYK
    QUWsHaGQZRenKCYK
    KENyGed2iZGGAwJV

    • CAUTION: Use leather cleaner in a well-ventilated area to avoid breathing in harmful vapors.

    • Use a leather cleaner and a clean cloth to clean surfaces to be joined together.

    • For this step I used a mixture of 1 ounce of vinegar and 1 ounce of water mixed in a bowl for my leather cleaner, but you can use whatever leather cleaner you have available.

  3. pSNXZTdJd3YMQj6f
    pSNXZTdJd3YMQj6f
    N6GaoEPKqIaZFn3R
    QeRpIBH5wKZEO5B1

    • Insert prong(s) into pre-cut holes on the main belt strap.

  4. DoF4QlZWnIGrV1q3
    DoF4QlZWnIGrV1q3
    hS2soZDaQVAN6cPd
    hG6lGlrx1xs1lAmL

    • Insert the end of the leather belt into the buckle and fold over the bar holding the prong(s) in place.

  5. H1dTUJ4DDFStGdHT
    H1dTUJ4DDFStGdHT
    K25U4V6qqBU2qsqG

    • WARNING: FLAMMABLE! Do not use adhesives near open flames or other heat sources including sparks as a fire could start.

    • CAUTION: Use adhesives in a well-ventilated area to avoid breathing in harmful vapors.

    • Apply a small amount of your leather adhesive to the leather belt on both sides of the pre-cut holes for the buckle prong(s).

  6. YONtINiLUdsl6MUj
    YONtINiLUdsl6MUj
    6m6bZlMQOGxW1QZw
    HLfbrB6HLxMAwVQD

    • Join the main belt strap and the end of the belt strap together where the leather adhesive was applied.

    • Apply light to medium pressure and hold in place for about two (2) minutes.

    • Using a clean cloth, paper towel, or cotton swab, remove any excess adhesive (squeeze-out) from the sides of the joined surfaces.

  7. sS6hpvKaV4q3OBlY

    • Slide the keeper loop into position near where the location of the joined surfaces.

    • Be sure not to push the keeper loop into the joined surfaces as the surfaces could come apart.

  8. FMuHyO6mub3GAERC
    FMuHyO6mub3GAERC
    yECtixayB3UPXvoG
    exl5XdCaYCDPGksf

    • WARNING: FLAMMABLE! Do not use adhesives near open flames or other heat sources including sparks as a fire could start.

    • CAUTION: Use adhesives in a well-ventilated area to avoid breathing in harmful vapors.

    • Apply a small amount of leather adhesive to both surfaces to be joined on the other side of the keeper loop.

  9. vuSeMCaJsZUJMHun

    • Join both surfaces together where the leather adhesive was applied.

    • Apply light to medium pressure and hold in place for about two (2) minutes.

    • Using a clean cloth, paper towel, or cotton swab, remove any excess adhesive (squeeze-out) from the sides of the joined surfaces.

  10. jqNxnWjqaVvDvxkt

    • Allow leather adhesive to dry (cure) as stated in the directions on the original leather adhesive packaging.

    • For the E6000 adhesive used in this Fast Fix guide, the dry (cure) time is 24 to 72 hours depending on material and air temperature of the work area.

Abschluss

You did it! Give yourself a pat on the back!

Tinte & Feder

Christopher Fowler

Mitglied seit: 06/10/22

181 Reputation

0 Kommentare