Einleitung
Welcome to this guide! Here is some basic background information required to begin the fix:
Background experience:
While this guide may look intimidating, no background experience is required! All steps here are made to be novice-friendly.
Hazards:
If you are inexperienced with electricity, rubber/leather gloves are recommended as they act as insulators.
Why is this repair needed?:
This repair is needed as it can be a good skill to know for the future. This fix can apply to anything requiring a fix of a wire.
If all these requirements are met, you can begin the guide!
-
-
Grab the terminal of the power adapter and loosen the 3 mm screws of the terminal if needed.
-
Wrap one exposed copper wire around one loosened 3 mm screw and tighten the screw immediately.
-
Repeat the second bullet point for the second copper wire.
-
-
-
Push the shell back into the terminal so that the terminal is protected by the shell.
-
Grab the 3 mm screws that were taken out in the first step and re-screw them into the shell.
-
-
-
Plug in the power adapter into a functioning power outlet.
-
The light globe should now successfully turn on!
-
