Einleitung
Werkzeuge
-
-
Use a small prying device to delicately separate the front casing from the back. New line.
-
-
-
Remove the 2 screws on the right side of the camera.
-
Remove the 2 screwson the left side of the camera
-
-
-
Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out 
-
-
-
Using a size 0 Phillips head, remove 3 screws holding the ribbon cable that covers the back of the lens.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.