Einleitung
Werkzeuge
-
-
Open kissliser
-
click on style
-
Decrease the infill density to a value of around 20% is normal
-
-
-
Go to the machine main menu.
-
There you can see the print speed in percentage.
-
Reduce the print speed in between a value of 50% to 100%.
-
-
-
Open kisslicer
-
Go to style
-
change the infill pattern to straight,octagonal, rounded based on the kind of print you are going on with.
-
-
-
In some case , the filament may stick on the nozzle tip and while going for the print, the filament sticked will hit the infill and cause infill to break.
-
Remove the sticked filament from the nozzle with the help of a needle tip,
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
